Translate this page

Plan to restart San Onofre nuclear plant submitted to regulatory commission


Thursday, October 4th, 2012
Issue 40, Volume 16.
You need Flash player 8+ and JavaScript enabled to view this video.


SAN ONOFRE (Wire Service) - A plan to restart the shuttered San Onofre Nuclear Generating Station in northern San Diego County has been submitted to the Nuclear Regulatory Commission for approval, the plant's operator announced today, Thurs., Oct. 4.

The plan, which cites no specific restart date, calls for one of two units at the facility to be restarted at 70 percent power for a five-month trial period, according to Southern California Edison, which runs the plant and co-owns it with San Diego Gas & Electric and the city of Riverside.

The commission, which must sign off on the restart plan, is expected to spend months reviewing it.

Critics expected to lobby against the plan's approval include Friends of the Earth. The environmental group released a statement this morning, calling Edison's restart plan "a reckless gamble that flies in the face of the utility's claim that it puts safety ahead of profits."

The units -- called Unit 2 and Unit 3 -- were each shut down in January.

Unit 2 was shut down for planned maintenance, while Unit 3 was abruptly taken offline after a leak was detected in one of its steam generator tubes.

Edison is proposing to restart Unit 2 while Unit 3 remains offline for further inspection, analysis and testing.

"Safety is our top priority, and after conducting more than 170,000 inspections to understand and prevent the problem, and confirming the corrective actions we have taken to solve the problem with the top experts from

around the world, we have concluded that Unit 2 at San Onofre can be operated safety and within industry norms," Southern California Edison President Ron Litzinger said in a statement.

"When implemented, this plan will get San Onofre Unit 2 back to providing reliable and clean energy to Southern Californians."

The leak in Unit 3 was caused by tube-to-tube wear due to a phenomenon called fluid elastic instability, Edison reported. It said a combination of high-steam velocity and low-moisture conditions in specific locations of tube

bundles and ineffective tube support systems in the same bundle locations causes the phenomenon and subsequent wear, leading to leaks.

Unit 2 was also susceptible to the same vibration-causing environment but to a lesser degree than Unit 3, officials said, noting Unit 2 can be safely restarted at 70 percent power without triggering fluid elastic instability.

Some critics argued against the assertion, saying the designs of the units are essentially the same.

Edison officials said if the restart plan is approved, they would operate Unit 2 for five months and then shut it down to inspect it for leaks.

The plan also envisions Edison installing early warning monitors on the Unit that can detect extremely small leaks faster, and plant employees receiving additional training on how to respond to a leak.


 

2 comments

Comment Profile ImageBill Hawkins
Comment #1 | Thursday, Oct 11, 2012 at 5:52 pm
San Onofre Restart Plan Unit 2 Reports prepared by independent experts have not demonstrated that Public will be safe in case of a Main Steam Line Break conncurrent with a single equiment failure, consequential equipment failure and operator errors. The reports conclusions are conflicting, contradicting and have not been coordinated amongst these experts to arrive at a clear conclsion.
Comment Profile ImageMajid
Comment #2 | Thursday, Oct 25, 2012 at 1:24 am
Wednesday that a possible leak in one of the reaoctr’s steam generator tubes could have resulted in a tiny release of radioactive material into the atmosphere. So a nuclear power plant public relations person (damage control) unnamed by the crack reporter from this fluff piece states something about a POSSIBLE leak. Possible? Like, it may have happened? Is this plausible deniability, or are you really not sure it happened? It can only be one of two things it means we don't know (hasn't been looked into thoroughly enough to substantively know), or it means there was a definite leak, we are not saying how much, and we will state it this way to soften the blow for damage control purposes .If it was the first one . . . how could they know how much leaked out, at what rate, in what dose, if they aren't even sure of a leak at all? How could a closely monitored thing such as radiation leakage from a power plant be unknown? (hint: it's not that closely monitored, actually) How could a crack in a steam generator tube release radiation?All viable questions, none asked. No diagram of what a steam generator tube is, where it is located in the plant. No questions on how many sieverts being measured outside the plant, etc etc etc etc.The amount of complete ignorance and rationalisation for individuals to try to placate themselves into thinking they are being safely taken care of in the US by kind hearted officials in the nuclear power industry is mind-boggling.

Article Comments are contributed by our readers, and do not necessarily reflect the views of The Valley News staff. The name listed as the author for comments cannot be verified; Comment authors are not guaranteed to be who they claim they are.

 

Add your Comment


Name

Images, Formatting, or HTML is not allowed : plain text only. You may post up to 5 website addresses within your comment.




Disclaimer

The Valley News has tightened its' policy regarding comments.
While we invite you to contribute your opinions and thoughts, we request that you refrain from using vulgar or obscene words and post only comments that directly pertain to the specific topic of the story or article.
Comments that are derogatory in nature have a high likelihood for editing or non-approval if they carry the possibility of being libelous.
The comment system is not intended as a forum for individuals or groups to air personal grievances against other individuals or groups.
Please, no advertising or trolling.
In posting a comment for consideration, users understand that their posts may be edited as necessary to meet system parameters, or the post may not be approved at all. By submitting a comment, you agree to all the rules and guidelines described here.
Most comments are approved or disregarded within one business day.

RSS FeedFacebookTwitter



Advertisement for Temecula Dining





Subscribe


Most Commented


Reach Local Customers



The Valley News The Valley News
760-723-7319 - 1588 S. Mission Rd. Suite 200, Fallbrook CA 92028
All contents copyright ©2014
About Us
Earthquake Information
Business Listings
Contact Us
Letter to the Editor
Report a website error
Sitemap
Online Digital Edition
RSS Feeds
Login